Part Number Hot Search : 
SCI0402S C1006 25DMB A5885M DG390BDJ ENA1112 E105M ZTTCV
Product Description
Full Text Search
 

To Download PSP-1500-5 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TOTAL POWERFunction INT'L 1500W Single Output with PFC
Features :
PSP-1500
series
AC input active surge current limiting Built-in active PFC function Protections:Short circuit/Over load/Over voltage/Over temperature Built-in constant current limiting circuit Built-in remote ON-OFF control Built-in remote sense function 3 years warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
PEAK LOAD
PSP-1500-5 5V 217.5A 0 ~ 217.5A 1087.5W
Note.4 1200W
PSP-1500-12 12V 112.5A 0 ~ 112.5A 1350W 1500W 150mVp-p 10 ~ 13.2V 3.0%
0.3%
0.5%
PSP-1500-13.5 13.5V 100.5A 0 ~ 100.5A 1356.75W 1500W 150mVp-p 12 ~ 15V 2.0%
0.3%
0.5%
PSP-1500-15 15V 90A 0 ~ 90A 1350W 1500W 150mVp-p 13.5 ~ 18V 2.0%
0.3%
0.5%
PSP-1500-24 24V 56.4A 0 ~ 56.4A 1353.6W 1500W 150mVp-p 20 ~ 26.4V 1.0%
0.2%
0.5%
PSP-1500-27 27V 50.4A 0 ~ 50.4A 1360.8W 1500W 150mVp-p 24 ~ 30V 1.0%
0.2%
0.5%
PSP-1500-48 48V 28.5A 0 ~ 28.5A 1368W 1500W 200mVp-p 41 ~ 56V 1.0%
0.2%
0.5%
OUTPUT
RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 6.0%
LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD
PROTECTION OVER VOLTAGE
0.5%
2.0%
1500ms, 50ms/230VAC at full load 24ms/230VAC at full load 176 ~ 264VAC 47 ~ 63Hz 0.96/230VAC at full load 77% 8.4A/230VAC 80A/230VAC <3.5mA / 240VAC 115 ~ 140% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V Protection type : Shut down o/p voltage, re-power on to recover 84% 84% 84% 85% 85% 86% 248 ~ 370VDC
57.6 ~ 67.2V
OVER TEMPERATURE
FUNCTION REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT
95
(TSW1) Detect on the heatsink of PFC MOSFET
90 (TSW2) Detect the winding of output choke
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <30mA -10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE
SAFETY & ISOLATION RESISTANCE EMC
(Note 5)
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 HARMONIC CURRENT
EMS IMMUNITY MTBF OTHERS DIMENSION PACKING
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
43.4K hrs min. MIL-HDBK-217F (25 ) 278*129*190.5mm (L*W*H) 7.4Kg; 2pcs/15.5Kg/1.28CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% Duty cycle maximum within every 30 seconds(max.). Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
1500W Single Output with PFC Function
Mechanical Specification
PSP-1500
Case No. 925A
series
Unit:mm
127
4-M4
31.75
52
200
CONTROL
ADJ LED 4 3 2 1 8 7 6 5
113
83
2
4 3
6 5
6-M3
Air flow direction
8
38
O/P
12 9 39
1
6-M6
47.5
32
185
240
24.75
63.5
63.5 190.5
3 2 1
7
190.5
10
127
I/P
4-M4
31.75
52
200 278
AC Input Terminal Pin. No Assignment DC Output Terminal Pin. No Assignment Pin No. Assignment
1 2 3
AC/L AC/N FG
Pin No. 1,3,5 2,4,6 Assignment DC OUTPUT +V DC OUTPUT -V
Control Pin. No Assignment : MOLEX 5559-NP uses 5558male crimp terminal
Pin No. 1 2 3 4 Assignment NC -S G RCPin No. 5 6 7 8 Assignment Mating connector Terminal NC MOLEX 5556 NC MOLEX 5557-NR Female crimp Terminal +S receptacle RC+
Derating Curve
Output Derating VS Input Voltage
12 ~ 48V
100
100 90
80
80
60
5V
70
LOAD (%)
40
LOAD(%)
0 10 20 30 40 50 60 70
60 50 40
20
-10
176
264
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (V) 60Hz


▲Up To Search▲   

 
Price & Availability of PSP-1500-5

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X